- 1220 Reno Ave # C, Modesto, CA
- Open 24 hours
- (209) 604-0405
heat pump installation modesto
Contact Info
- 1220 Reno Ave # C, Modesto, CA
- (209) 604-0405
- info@yourkac.com
Heat Pump Installation in Modesto – Heating & Cooling in One System
Modesto Heat Pump Installation, Sized and Installed Right
Thinking about a heat pump for your Modesto home? At Yourk AC we design, size and install high-efficiency heat pump systems that cool through Central Valley summers and heat through foggy winter mornings — from a single all-electric outdoor unit. Whether you are replacing an aging furnace-and-AC pair, going all-electric, or building new, our licensed HVAC technicians run a full load calculation first, then quote the job in writing. Call (209) 604-0405 for a free in-home estimate anywhere in Modesto and Stanislaus County.
Heat Pump Installation · Modesto, CA
One system. Both seasons.
A heat pump cools your home in the Valley heat and heats it when the fog rolls in — on electricity alone, no gas line required. Tap below to see how it works either way.
- Up to 20+SEER2 cooling
- 105°F+Valley summers
- 0Gas burners
One all-electric system
Heating and cooling from a single outdoor unit — no furnace, no gas line, no combustion inside your home.
3× the efficiency
Heat pumps move heat instead of burning fuel, delivering roughly three units of heat per unit of electricity in mild weather.
Sized, not guessed
We run a load calculation on your actual home — square footage, insulation, windows, ducts — before we quote a ton of capacity.
Most installs in a day
A typical changeout is done in one working day. Full duct or electrical upgrades can add a second day — we tell you up front.
How your installation actually goes
Four steps, no surprises. Click through to see what happens when.
01
We look at the whole house, not just the old unit
A technician measures your rooms, checks duct condition and static pressure, inspects your electrical panel capacity, and asks which rooms never get comfortable. That last answer changes the design more often than people expect.
02
A load calculation, then a fixed written price
We calculate the heating and cooling load for your Modesto home and match a heat pump to it — oversizing short-cycles and wastes power. You get equipment model numbers, efficiency ratings, electrical work, permit, and warranty in writing before anything is ordered.
03
Floors covered, old system out, new system in
We protect your flooring, recover the old refrigerant to code, set the new outdoor unit on a proper pad, install the air handler and line set, pull a deep vacuum, and make the electrical and thermostat connections. Your home is left clean.
04
Commissioned, tested, and explained
We verify refrigerant charge and airflow, run the system in both heating and cooling, register the manufacturer warranty for you, and walk you through the thermostat and filter schedule before we leave.
What size heat pump does my home need?
Slide your approximate conditioned square footage for a ballpark starting point.
Ballpark only, based on roughly 550 sq ft per ton for Central Valley homes. Ceiling height, insulation, window area, shade and duct condition all move the real number — which is why we run a Manual J load calculation on site before quoting.
3tons
Typical starting point
About 36,000 BTU/h · 1 day install
Get a straight answer on a heat pump for your home
Free in-home estimate in Modesto and across Stanislaus County. Ask us about current utility rebates and financing options.
- Licensed & insured
- 24/7 emergency service
- Locally owned in Modesto
Why Choose Yourk AC for Heat Pump Installation in Modesto?
A heat pump is one of the largest comfort decisions you will make for your home, and most of the outcome is decided before the equipment ever arrives. Sizing, duct condition, electrical capacity and commissioning determine whether the system you paid for actually delivers its rated efficiency. Oversized units short-cycle and waste power; undersized units run constantly on the hottest afternoons. This is why we measure and calculate first rather than matching whatever tonnage was there before.At Yourk AC we install ducted heat pumps, dual-fuel systems and ductless mini-splits for both residential and commercial customers across Modesto. Our licensed HVAC technicians handle the full job in-house: load calculation, equipment selection, permit, electrical coordination, refrigerant line set, startup and warranty registration. You get model numbers, efficiency ratings and a fixed price in writing before anything is ordered.And because a heat pump handles both seasons, the same system we install for your summer cooling is the one keeping you warm in January. We size it for both, test it in both, and back it with 24/7 service if you ever need us.Heat Pump Installation FAQs
Do heat pumps really work in Modesto’s climate?
Yes. Modesto is close to an ideal climate for them — hot, dry summers and mild winters that rarely sit below freezing for long. Modern inverter heat pumps produce full rated cooling through Valley heat waves and keep heating capacity well below typical winter lows here. For homes that want a backup, we can also install a dual-fuel system that pairs the heat pump with a gas furnace for the coldest mornings.
Can one heat pump replace both my furnace and air conditioner?
That is exactly what it is designed to do. A heat pump moves heat in either direction, so a single outdoor unit and air handler replace the AC condenser and the furnace. Most Modesto homeowners who switch also remove a gas appliance and the combustion venting that came with it.
How long does a heat pump installation take?
A straight changeout on existing ductwork is usually finished in one working day. If the job also needs duct repairs, a new line set routed differently, or an electrical panel or circuit upgrade, plan on two days. We tell you which one applies at the estimate, not on installation morning.
What size heat pump does my home need?
As a rough starting point, Central Valley homes run about 500–600 square feet per ton, so a 1,600 sq ft house often lands near 3 tons. That is only a starting point — insulation, ceiling height, window area, shade and duct leakage all move the number, which is why we calculate the actual load on site before quoting.
Are there rebates or financing for a new heat pump?
Utility and state incentive programs change from year to year, so we check what is currently available for your address and utility before you commit. We can also walk you through financing options. Ask us during the estimate and we will tell you what actually applies right now.